No Products in the Cart
Set of 4: Each product is sold as a complete set of four pieces, one piece for each wheel.
Small floating center caps for BMW EXCLUSIVE Carbon Fiber. These are made for stock/OEM wheels that match the size selected on this page.
Factory wheels can vary by year, trim and wheel package, including special editions and premium options. Our model list is a general guide.
Before ordering, check your current cap one of two ways:
Need a size that isn’t listed? We may be able to make a custom set. Contact us with the full part number on the back of your current center cap and your vehicle’s year, make and model. We’ll check the options before you order.
Use these models as a starting point. The selected cap must match your existing cap’s dimensions, rear mounting and clearance; a model name or face diameter alone does not confirm fit.
This style is listed in 68mm only. General reference for select BMW factory wheels with a 5x120 bolt pattern (U.S. model years); match the original cap before ordering:
56mm is not listed for this style. If your existing cap needs 56mm, choose a BMW style offering that size or contact us about possible custom options.
Changeover years can go either way depending on build date. If you are not sure, check the number on the back of your current cap: 36136783536 family = 68mm, 36136850834 family = 56mm.
Don’t see your model, or have a question? Contact us with the full rear cap part number and your vehicle details.
These floating center caps keep the emblem upright as the wheel turns. Choose the size and design shown in the product options, then check your original cap using the fitment guide above.
Constructed with a high-impact ABS plastic shell and stainless steel / anodized aluminum hardware. Fully weatherproof and car-wash safe — sealed against rain, road spray, and moisture. The UV-resistant finish won't fade, yellow, or crack over time. A precision bearing at the center keeps your logo spinning freely and silently at any speed — centered and level at 10 mph or 100 mph.
Remove your existing OEM center cap (pop or unscrew it from the hub) and snap the Float King cap directly into the same mounting point. No drilling, no wiring, no modifications to your vehicle. Comes as a set of 4 — one cap per wheel.
Common OEM and backside reference numbers associated with the cap options on this page:
68mm: 36131095361, 36131180419, 36136783536
Use the full part number, including suffix letters, as a reference. Contact us to check it against the selected cap’s dimensions and mounting.
